Technical Data | |||||
Max. Temperature | 90℃ | Max. Turning Angle | 90° 120° 180° | ||
Max.Opening Angle | - | Tightening Torque | 8-12N.m | ||
Lever Torque Test | 0.3-0.4N.m(Static Pressure is Zero) | Lever Break Torque | ≥5N.m | ||
Noise Test | Max.20db at 3bar(With Noise Reducer) | Working Pressure | Max. 1.2MPa | ||
Burst Test Pressure | Water Static Pressure Max. 3.5MPa | Sealing Test | 0.8MPa(Fully Tested One By One) | ||
Burst Test Pressure | According to the En817,GB18145-2003 Standard 〉70000cycles; According to the ASME A112.18.1-2005 Standard 〉500000cycles | ||||
Ceramic Disc | Ceramic Disc AL2O395%;Hardness≥1050HVS; Flatness:0.3um; Roughness:0.2um;Porosity:60%-80% |
Flow Rate Test | |||||||
According to GB18145-2003,the flow rate is tested under dynamic pressure 0.3±0.02MPa without any accessories. | |||||||
Pressure(Bar) | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 3.5 |
Average Flow Rate(L/min) | 10.2 | 14.4 | 17.9 | 20.6 | 23.1 | 26.1 | 28.4 |
Burst Test | Sealing Test | |||||
Test Item | Inlet | Outlet | Test Item | Inlet | Outlet | |
Outlet Status | Open | Close | Outlet Status | Open | Close | |
Pressure(Mpa) | 2.5±0.05 | 1.6±0.05 | Pressure(Mpa) | 1.6±0.05 | 1.6±0.05 | |
0.4±0.02 | 0.4±0.02 | 0.4±0.02 | 0.4±0.02 | |||
Time(s) | 60±5 | Time(s) | 60±5 | |||
Technical Requirements | No Deformation,No Leakage | Technical Requirements | No Deformation,No Leakage |