35mm low three-hole cartridge-transparent

Technical Data
Max. Temperature 90℃ Max. Turning Angle 90° 
Max.Opening Angle 23° Tightening Torque 8-12N.m
Lever Torque Test 0.3-0.4N.m(Static Pressure is Zero) Lever Break Torque ≥15N.m
Noise Test  Max.20db at 3bar(With Noise Reducer) Working Pressure Max. 1.2MPa
Burst Test Pressure Water Static Pressure Max. 3.5MPa Sealing Test 0.8MPa(Fully Tested One By One)
Burst Test Pressure According to the En817,GB18145-2003 Standard 〉70000cycles;
According to the ASME A112.18.1-2005 Standard 〉500000cycles
Ceramic Disc Ceramic Disc AL2O395%;Hardness≥1050HVS; Flatness:0.3um; 
Roughness:0.2um;Porosity:60%-80%                           

Flow Rate Test

According to GB18145-2003,the flow rate is tested under dynamic pressure 0.3±0.02MPa without any accessories.
The flow rate of bathtub should be 0.33L/S.The flow rate of basin should be 0.2L/S. 

Pressure(Bar)

0.5

1

1.5

2

2.5

3

3.5

Average Flow Rate(L/min)

6.69

10.16

12.25

14.62

16.01

18.29

19.85


Burst Test Sealing Test
Test Item Inlet Outlet Test Item Inlet Outlet
Outlet Status Open  Close Outlet Status Open  Close
Pressure(Mpa) 2.5±0.05 1.6±0.05 Pressure(Mpa) 1.6±0.05 1.6±0.05
0.4±0.02 0.4±0.02 0.4±0.02 0.4±0.02
Time(s) 60±5 Time(s) 60±5
Technical Requirements No Deformation,No Leakage Technical Requirements No Deformation,No Leakage


None

Previous:

Next:

40mm 2-3-step cartidge